Saturday 16 August 2008

Acrylic Paint Transfer

Supplies needed: Acrylic dabbers, photocopy of an image, water spritzer bottle, paintbrush, card stock, craft sheet and heat tool (optional)



Take the lid off the dabbers and brush the paint onto the card stock, ensure you get a good coverage


Take your photocopied image ( remember that you will get a reverse of the image, so don't use bold words), flip it over and place it in the acrylic. Lightly press it down making sure it's smooth and not wrinkled


Leave to air dry for at least 15 minutes and then if you wish give it a blast with the heat tool


Only move onto this step when you are sure your paint is completely dry

Take your water filled spritzer bottle, spray the back of the paper no more than two squirts, you don't want it too wet


Next start to rub the paper very gently with your finger


Keep rubbing and extra spritzing if you need too


Eventually you will get rid of all the paper, but it does take a bit of patience as you have to be careful not to wet it too much and rub the image away


You can do exactly the same on a canvas








Apparently the paint in the acrylic dabbers is slightly different to other acrylics as it is more chalky and that's why the transfers work best with these paints. But you can use other mediums. I tried it with Jo Sonia's background paints but didn't get such a good effect

69 comments:

  1. Fabulous effect!! I need to invest in more paint dabbers, as it's mostly tubes of paint I have!! xx

    ReplyDelete
  2. You have received an award, please check out my blog XXX

    ReplyDelete
  3. brillaint sam..deoes it have to be a photocopy?

    ReplyDelete
  4. Doesn't have to be a photocopy Shaz but I have found that these make the best transfers

    ReplyDelete
  5. This is a really lovely effect x thanks for sharing x

    ReplyDelete
  6. does it have to be the paint dabbers or will any acrylic paint work?

    ReplyDelete
  7. I done this with gel medium before over my paint color and it worked pretty good

    ReplyDelete
  8. lazer printer ink will transfer too, but not inkjet, its water based and will run...

    ReplyDelete
  9. Thanks for the visual tutorial. I look forward to trying this technique in my art journal. Thanks for sharing.

    xo Susi xo

    ReplyDelete
  10. Thank you for this great post!

    ReplyDelete
  11. I can't wait to try this! If it's ok with you, I'd like to link back here when I do. Thanks for the inspiration and tutorial!

    ReplyDelete
  12. I am doing this right now! Thank you for the great tutorial!

    ReplyDelete
  13. I am doing this right now. Thank you for the great tutorial!

    ReplyDelete
  14. BRILHANTE !!!! Thank you :)

    ReplyDelete
  15. Thanks for this cool tip! i cant wait to try it out!!

    ReplyDelete
  16. that is one amazing trick!!!!thanks for sharing!

    ReplyDelete
  17. Laser prints are excellent to use as well. And I've used Gel medium and it works great. I've never used it with colours though. Just a clear medium. I'll have to give it a try! It looks great!

    ReplyDelete
  18. This is so creative! Would this work with a canvas fabric? Would the image transfer to something like a canvas tote bag?

    ReplyDelete
  19. wow...I will be doing this. Thank you for sharing.
    Debbie

    ReplyDelete
  20. This is so cool..Thank you for sharing.
    Debbie

    ReplyDelete
  21. Wonderful technique thanx for the share x

    ReplyDelete
  22. LOVE to create new things, and Crafts. I must say this one is New to me, Very Nice to know.

    ReplyDelete
  23. So cool! Can you do this with ordinary acrylic paints, or is it only he acrylic dabbers?

    ReplyDelete
  24. You can also let any paint or medium dry and get a photocopy of a photo, put it face down and rub nail polish remover on the back! works great! need to rub over it for a while and takes a bit of practice but i love it (:

    ReplyDelete
  25. Thats a really great idea :D

    I love it!

    ReplyDelete
  26. i love this.... thanks for sharing this :)

    xx

    ReplyDelete
  27. Where can I buy Acrylic Dappers? I have never seen them before... Is it a brand or a specific type of acrylic paint? Also would an image printed off a normal household printer work?

    ReplyDelete
  28. Like others here, I have used gel medium with great results. In addition to laser print outs, I have also done it with magazine pages!

    ReplyDelete
  29. Neat idea! Thanks for sharing!

    ReplyDelete
  30. you can also use acryllic medium, which i imagine would be cheaper. It also works with clear packing tape and chart-pack markers
    make sure the image you have has toner in it; that's what transfers

    ReplyDelete
  31. I'm so glad I found this site. Love this technique. Can't wait to try it out.

    ReplyDelete
  32. Just an idea or 2...If, as you commented, "Apparently the paint in the acrylic dabbers is slightly different to other acrylics as it is more chalky and that's why the transfers work best with these paints."...then, maybe you could make your acrylic paint more chalky by adding hydrated lime, which is similar in texture to powdered chalk...& it is noted that hydrated lime, available at building centers, is preferred over quick lime, since quick lime will react with the water and heat up...whereas hydrated lime has been soaked in water then dried.
    In addition, another item that might be added to acrylic paint, which is similar to powdered chalk texture, is non-sanded tile grout powder...(also available at building centers). According to recipes online for diy chalkboard paint, you just add non-sanded grout to the paint & it makes the paint smooth & thick, while giving the painted surface some tooth so that chalk will grab or hold onto the painted surface. A recipe for home-made or do-it-yourself (diy)chalk-board paint can be easily found by doing a search online.
    I read that the paint in the dabbers is non-acidic, so possibly the hydrated lime or the non-sanded grout might work, if one is concerned about acid...,since as far as I was able to discern from a quick online search, they are not acidic....however, please, make sure & do your own test... I haven't tried this yet...just some ideas... :)

    ReplyDelete
  33. Great technique, thanks for sharing. Your site is a great resource!

    -caroline @ c.w.frosting

    ReplyDelete
  34. I'm new to your blog & love this technique. Hummm...wondering if it would also work on fabric ironed onto a stiff Pellon?

    ReplyDelete
  35. It seems simple enough to mirror the image when printing so that you get a true image after transfer (including printing).

    ReplyDelete
  36. I learned this by rubbing the back of the paper with a cotton ball with thinner, works instantly without drying or hard rubbing

    ReplyDelete
  37. Adorable! Thanks for sharing!

    ReplyDelete
  38. Can I do this on a shirt??

    ReplyDelete
  39. Great tutorial-very easy to understand-thank you!

    ReplyDelete
  40. wow thanks Added to pinterest. thanks for all your wonderful information. Rose

    ReplyDelete
  41. Love it...Have you had the opportunity to take a course with Claudine Hellmuth of Ranger? She does a lot of transfer techniques that are cool.....Love those dabbers!!1

    ReplyDelete
  42. This is super cool ! Thanks for making the instructions so simple. I can't wait to try it AND check out your other craft ideas.

    ReplyDelete
  43. Wow! This is amazing. Can't wait to try it!

    ReplyDelete
  44. I used a flat wall paint (sample can of Behr) and also one corner with a laser printer copy and one corner with my Epson Inkjet printer copy
    and they both turned out great... very happy with the results... the inkjet did not run or smear... so I am thinking as long as you are not using a gloss paint it should work just fine...

    ReplyDelete
  45. Thank you, thank you, thank you, I'm doing a painting which is all words and was dreading the thought of free handing them, this will help me lots and don't worry I'll remember to mirror the image before I do it.
    Thanks again.

    ReplyDelete
  46. this is awesome! my daughter is gonna love this. thanks for the post. :)

    ReplyDelete
  47. Would this same thing work with mod podge a glossy 4x6??

    ReplyDelete
    Replies
    1. Yes, I did it with modpodge, it came out great!

      Delete
  48. I love your site. I found you on Pinterest and am glad I did. I am now a subscriber to your blog. I have everything to try this except I have an inkjet printer soooo. I guess I'll have to head to my local office supply store with some photos in hand for copies.

    ReplyDelete
  49. Can't believe how easy that looks! Totally giving it a shot!

    ReplyDelete
  50. Could anyone tell me if this works on wood? I have a mobile and would like to reform it using this technique. Thank you very much!

    ReplyDelete
  51. This is a lovely blog - so much creative info! Thanks!

    ReplyDelete
  52. wonderful tutorial keep them coming

    ReplyDelete
  53. I LOVE this idea - thank you so much!

    ReplyDelete
  54. Two questions: Does this work with acrylic ink, instead of acrylic dabbers and does the image have to be printed in a laser printer or can it be printed in a regular one?

    ReplyDelete
  55. Hi. Two question: does this work with regular acrylic ink? And can the image be printed in a regular printer?
    Thank you

    ReplyDelete
  56. Hello, It's really a fun thing to do! But what kind of paper do you use? A real photo or do you use copypaper...?
    Thx

    ReplyDelete
  57. You need to use a copy of a photo from an ink jet printer or a photocopier as I doubt the ink will transfer from an original or laser print.

    Sam xx

    ReplyDelete
  58. Very nice and easy to follow tutorial. Thanks!

    ReplyDelete
  59. thanks for sharing this fab idea x

    ReplyDelete
  60. Do you use photo paper or plain, basic copy paper?

    Thanks.

    ReplyDelete
  61. I did a transfer like this several years ago (about the time this was published). I used a high quality laser print on ordinary copy paper. The paint I used was a flat wall paint from Home Depot. I put the paint on a t-shirt, placed the image face down into the wet paint, rolled it down with a rolling pin to make good contact between the paint and the image, then let it dry. The paper came off the image just as pictured in the tutorial above with a little water and my finger.

    My understanding is this technique works on any substrate that acrylic paint will stick to, so it should work with fabric, wood, glass, metal, ceramic, or just about anything that isn't waxy or oily.

    ReplyDelete