Saturday 21 March 2009

Slide Mount Box

Supplies Needed: Silde Mounts (approx 8), Acetate, Main Image, Backing Paper, Cuttlebug, Embossing Folders, Sanding Block / Paper, Window Lead or Metalic Tape, Scissors, Glue

Place a slide mount into the cuttlebug folder being careful where you place is as this pattern will create the top of your box - I did a couple
Run it through
And you should end up with something like this
Choose the one you want to use and sand it down

Using double sided tape (or other glue), start to prepare some of the slide mounts ready to be stuck together
Cut a piece of backing paper big enough to cover the hole and stick it down on one of the slide mounts - This will be your back piece

Stick another slide mount directly over the top to create a sandwich - Put to one side for the moment


Take your embossed slide mount and a plain one. Stick a piece of acetate on the inside of each one



Take your image and place it on the acetate side of the plain slide mount. When you have it in the right place, stick it down

Then take your embossed slide mount and stick it over the top of the plain one with the image on - so in effect you have sandwiched your image between two pieces of acetate - set aside for the moment
Go back to the slide mount with the backing paper on and mount another 5 or 6 slide mounts on top, thus building up a stack


Once these are all stacked, take your top embossed piece with the image sandwiched in acetate and stick it on top of your stack

From a side view, they should look something like this

And from the top, like this


Using a range of different products you can enhance the embossing or leave plain if you wish

I chose to use the gold rub n buff

To make the edges of the box I used a piece of window lead. It is very, very soft, goes though the cuttlebug and bends very easily. But as an alternative you could use metalic foil tape

I measured the amount I needed

Chose an embossing folder and ran through the bug

Turned it round and did the same to the other end, unfortunately they didn't meet in the middle and there was a space of about a centimetre!!!

I peeled the backing tape off and then began to carefully wrap the lead around the stack of slide mounts




Finished edges

Final piece - obviously you can add any further embellishments or colours as you wish

This tutorial was created and inspired with the permission of Sue Abbott formerly of Paper Paraside. Please take time to check out her blog for other inspiring creations

14 comments:

Sam Marshall said...

That looks fantastic!

For the life of me said...

0hhh i will deff give this a go when im able xxxx

Lynne K said...

Great idea, will certainly be trying this one.

kathleen said...

Fantastic instructions, thankyou.

crafty creations said...

Great work Sam and fantastic clear instructions - will be on my todo list soon

x Hilda

Anonymous said...

Nice one Sam, and great instructions too! BTW the book is on it's way, posted yesterday 2nd class, so should get to you monday or tues! xx

Paper Paradise said...

You've given a great tutorial Sam. Clear and easy to follow steps with great photo's too.
Thanks,
Sue x

Lorraine said...

great instructions and great art..thanks

Ellen said...

brilliant the instructions are foolproof oh, I'll have to wait till I come back from Holland

Anonymous said...

BRILL TFS

xxxxxxxxxxx

Angelnorth said...

Looks fab Sam, love the lead to finish the edge!

Sam said...

What a fab idea.Thanks ladies
Sam x

Irene said...

What PERFECT timing is this tutorial !!!! I am making 9 stackable cubes for my grandson's first birthday and I am definitely going to use this technique on at least one of the cubes. Thank you, thank you, thank you for sharing.
Cheers, Irene :)

Denise said...

Thanks so much for this site! I've learnt a lot. Please visit my blog as I've left you a pressie!
Hugs
Denise
oxoxox